Formwork.
Formwork in concrete construction is used as a mould for a structure in which fresh concrete is poured only to harden subsequently. Types of concrete formwork construction depend on formwork material and the type of structural element. Formworks can also be named based on the type of structural member construction such as slab formwork for use in the slab, beam formwork, column formwork for use in beams and columns respectively etc.
Double Headed Jack
Double headed jacks are inserted into the standard to support the kwikstrip beam of the decking system.
Cantilever Bracket
These brackets are used to extend over areas where there is not support from below.
Decking Panel (Folded) 2.5mm
Decking panels are manufactured from 2.5mm flat steel plate and are used to pour concrete over to create a flat surface which is supported by kwikstage and kwikstrip beams.
Deck Filler
Decking fillers are used to fill the gaps which the decking panels do not fill.
U-Head Jack
These jacks are used to support timber or steel channels. They are used to carry two single timber bearers or box floor centers. The spigot fits into the head of the prop or the jack stem can be used on a kwikstage standard.
Box Floor Centres
Box floor centres are used to support decking Panels and are fully adjustable to accommodate different sizes.
Internal Corner Panel (ICP’s)
ICP’s are used to align and secure standard panels on inside corners at a 90° angle. These panels are available in standard Economy form panel lengths.
- 1
- 2